Fire Damaged Contents Cleaning in Clark County County, WA

24/7 Emergency Response, Board-Up and Roof Tarping

The first visit is about stopping things from getting worse. To fight a fire, crews often break windows and cut roof vents, and that leaves the property open to weather, animals and trespassers. An emergency crew boards openings with plywood or OSB, tarps roof penetrations, and can set temporary fencing where the property is exposed.

• Board-up of broken windows and doors
• Roof tarping over ventilation cuts and burn-through
• Water extraction from firefighting runoff
• Initial photo documentation for your insurer

Home Fire Damage Cleanup and Removal

In a house, fire damage is rarely confined to one room. Heat cracks drywall, smoke travels through return ducts into bedrooms, and soot lands on everything from hanging clothes to the top of the fridge. Residential crews map damage room by room, decide what can be cleaned versus replaced, and tear out charred material until they reach sound framing.

Char on studs and joists is usually removed by wire brushing, sanding or soda blasting, then sealed with a shellac-based primer to lock in residual odor. If the char runs deep enough to weaken a board, the contractor marks it for sistering or replacement before new drywall goes on. Skipping this step is how a smoke smell resurfaces a couple of humid summers later.

Fire Damage Removal for Businesses and Rental Properties

When a business closes, the losses start before the cleanup does. Commercial restoration is mostly about phasing the work so part of the space reopens while crews keep going behind plastic containment. Contractors who handle commercial losses can work after hours, coordinate with your property manager and insurer, and keep the paperwork clean enough for a business interruption claim.

• Restaurants and commercial kitchens with grease and protein residue
• Retail, office and warehouse spaces
• Multi-unit residential and rental properties
• Sprinkler discharge cleanup alongside smoke damage

Soot Cleaning and Smoke Residue Removal

Not all soot is the same, and using the wrong method can make a cleanable wall unrecoverable. Dry soot from hot, fast-burning wood and paper fires lifts off with HEPA vacuums and dry sponges. Wet soot from slow, smoldering plastics is greasy and smears. Protein residue from burned food is nearly invisible. Fuel oil soot from a furnace puff-back is heavy and black.

A good crew tests a small area first, identifies the residue, and picks the cleaning chemistry to match. That might mean dry chemical sponges on flat paint, alkaline degreasers on kitchen cabinets, or dry ice blasting on exposed framing in an attic. Surfaces that cannot be cleaned are sealed or replaced.

Smoke Odor Elimination and Air Quality Restoration

Smoke odor is the part of fire damage that people underestimate most. The particles are tiny and they work into insulation, carpet pad, upholstery and the inside of ductwork. Real deodorization happens in order: remove the source, clean what remains, then treat the air and structure.

• HEPA air scrubbers to capture airborne soot during work
• Thermal fogging that mimics how smoke penetrated
• Hydroxyl generators, which can run in occupied spaces
• Ozone treatment in unoccupied rooms when appropriate
• HVAC and duct cleaning so the system stops recirculating odor

Ozone is effective, but it is not safe for people, pets or plants, and it can degrade rubber and some fabrics. It is fair to ask the contractor which method they plan to use and why. A straight answer is a good sign.