Round-the-Clock Fire Damage Repair in Logan County County, CO

Emergency Fire Damage Response and Board-Up

The first visit is about stopping things from getting worse. Firefighters break windows and cut ventilation holes in roofs to get a fire out, which leaves the structure open to rain, animals and anyone walking by. Emergency crews cover openings with plywood or OSB, tarp the roof, and put up temporary fencing if the site is exposed.

• Board-up of broken windows and doors
• Roof tarping over ventilation cuts and burn-through
• Water extraction from firefighting runoff
• Initial photo documentation for your insurer

Residential Fire Damage Removal

In a house, fire damage is rarely confined to one room. Heat breaks open the drywall paper, smoke rides the return air into bedrooms, and soot settles on everything from closet clothing to the top of the refrigerator. A residential crew maps the damage room by room, separates what can be cleaned from what has to go, and removes charred materials down to sound framing.

Char on studs and joists is usually removed by wire brushing, sanding or soda blasting, then sealed with a shellac-based primer to lock in residual odor. If the char runs deep enough to weaken a board, the contractor marks it for sistering or replacement before new drywall goes on. Skipping this step is how a smoke smell resurfaces a couple of humid summers later.

Commercial Fire Damage Removal

When a business closes, the losses start before the cleanup does. Commercial restoration is mostly about phasing the work so part of the space reopens while crews keep going behind plastic containment. Contractors set up for commercial work can run night shifts, coordinate with property managers and adjusters, and document everything for business interruption coverage.

• Restaurants and commercial kitchens with grease and protein residue
• Retail, office and warehouse spaces
• Multi-unit residential and rental properties
• Sprinkler discharge cleanup alongside smoke damage

Soot Cleaning and Smoke Residue Removal

Not all soot is the same, and using the wrong method can make a cleanable wall unrecoverable. Dry soot from fast, hot fires of wood and paper vacuums and sponges off reasonably well. Wet soot from slow, smoldering plastics is greasy and smears. Protein residue from burned food is nearly invisible. Fuel oil soot from a furnace puff-back is heavy and black.

A good crew tests a small area first, identifies the residue, and picks the cleaning chemistry to match. That might mean dry chemical sponges on flat paint, alkaline degreasers on kitchen cabinets, or dry ice blasting on exposed framing in an attic. Surfaces that cannot be cleaned are sealed or replaced.

Smoke Odor Elimination and Air Quality Restoration

Smoke odor is the part of fire damage that people underestimate most. Smoke particles are small enough to work into insulation, carpet pad, upholstery and duct interiors. Real odor removal is a sequence: remove the source, clean what stays, then treat the air and remaining materials.

• HEPA air scrubbers to capture airborne soot during work
• Thermal fogging that mimics how smoke penetrated
• Hydroxyl generators, which can run in occupied spaces
• Ozone treatment in unoccupied rooms when appropriate
• HVAC and duct cleaning so the system stops recirculating odor

Ozone works, but it is unsafe for people, pets and plants and can break down rubber and certain fabrics. Ask the contractor which method they plan to use and why. A straight answer is a good sign.